Measurement: Difference between revisions

Latest revision as of 09:07, 10 June 2024

What is measurable?

You can measure any type of 3D data and 2D plans that are visualized.

Measurements are organized and stored in layers.

What measurement tools are available?

Line Measurement	Area Measurement	Volume Measurement
Distance	Area	Volume
Polyline	Area Strip
Vertical
Line
Axis Aligned

Distance Measurement

A Distance Measurement is a measurement of the shortest path between a specified start- and endpoint.

Create a Distance Measurement

Choose the "Distance" measurement tool
Left-click to designate a start/end point on the model or plan data
Choose the desired layer from the list to store the measurement
You can proceed with additional measurements or save the current one by clicking on "Finish"

For further information on working with measurement layers, click here…

Save a measurement

Once the measurement is completed, a number indicating the count of unsaved measurements appears next to the measurement symbol in the top-left corner

Open the measurement
Click on the red dialog box
A popup will appear; select "Save changes" to save the measurements

Modify a Distance Measurement

If a measurement hasn't been stored yet:

While the measurement remains unsaved, adjustments can be made to both measurement points. Additionally, you can select and edit other measurements during this stage.

To relocate a measurement point, simply hold down the Left-Mouse-Button and move the point to the desired location

For a stored measurement:

Click on the measurement you wish to modify
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Make the necessary modifications
Store the changes

Delete a measurement

Click on the measurement you wish to delete
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to remove
The measurement will turn red, indicating it's ready for deletion
Press the "Delete" key on your keyboard or click on the trash bin icon

or

Select the desired measurement in the navigation pane
Right-click to open the context menu
Click on the "Delete" button

Move a measurement from one layer to another

Option 1:

Select the measurement you wish to move within the navigation pane
Drag and Drop it into the desired layer

or

Option 2:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to move to another layer
The measurement will turn red, indicating it's ready for deletion
The Edit window appears
Click on the dropdown menu of "Measurement Layer"
Choose one of the existing ones, or create a new layer
Click on "Finish" to save the changes

>>Back to Top<<

Polyline Measurement

A Polyline measurement is a measurement of the shortest path along a selection of specified points.

It shows the distance between two or more points. (XYZ axis)

Create a Polyline measurement

Choose the "Polyline" measurement tool
Select the wanted points in the model or the plan data
Select the desired layer from the list in which the measurement is to be save
Click on the "Finish" button
Now you can start the next measurement or store the measurement

For further information on working with measurement layers, click here.

Save a measurement

Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.

Click on the measurement tape with the red number
Click on the red dialog box stating "Measurements and/or layers have not been saved yet"
A popup will appear; choose "Save changes" to save the measurements.

Change a Polyline measurement

If the measurement has not been saved:

While the measurement remains unsaved, adjustments can be made at any points. You can also select and edit other measurements during this stage.

To manipulate a Polyline measurement:

To add a point, left-click on the red line
To remove a point, left-click on the blue point you wish to remove
To relocate a point, hold down the Left-Mouse-Button and move the point to the desired position

If the measurement has been saved:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"

To add a point, left-click on the red line
To remove a point, left-click on the blue point you wish to remove
To relocate a point, hold down the Left-Mouse-Button and move the point to the desired position

Add a point:

Remove a point:

Relocate a point:

Delete a measurement

Click on the measurement you wish to delete

If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to remove
The measurement will turn red, indicating it's ready for deletion
Press the "Delete" key on your keyboard or click on the trash bin icon

or

Select the desired measurement in the navigation pane
Right-click to open the context menu
Click on the "Delete" button

Move a measurement from one layer to another

Option 1:

Select the measurement you wish to move within the navigation pane
Drag and Drop it into the desired layer

or

Option 2:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to move to another layer
The measurement will turn red, indicating it's ready for deletion
The Edit window appears
Click on the dropdown menu of "Measurement Layer"
Choose one of the existing ones, or create a new layer
Click on "Finish" to save the changes

>>Back to Top<<

Vertical Measurement

A Vertical measurement is a measurement of the height difference between two specified points.

Create a Vertical measurement

Select the "Vertical" measurement tool
Left-click to choose a point at the top and another point on the floor within the model
Select the layer for storing the measurement from the provided list
Proceed with additional measurements or store the current one

For further information on working with measurement layers, click here.

Save a measurement

Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.

Click on the measurement tape with the red number
Click on the red dialog box stating "Measurements and/or layers have not been saved yet"
A popup will appear; choose "Save changes" to save the measurements.

Change a Vertical measurement

If the measurement has not been saved:

While the measurement remains unsaved, adjustments can be made at both points. Additionally, other measurements can be selected and edited during this stage.

To relocate a measurement point, simply hold down the Left-Mouse-Button and move it to the desired location
However, note that the middle point of a Vertical Measurement is not movable.

If the measurement has been saved:

Click on the measurement you wish to modify
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Make the necessary modifications
Save the changes

Delete a measurement

Click on the measurement you wish to delete

If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to remove
The measurement will turn red, indicating it's ready for deletion
Press the "Delete" key on your keyboard or click on the trash bin icon

or

Select the desired measurement in the navigation pane
Right-click to open the context menu
Click on the "Delete" button

Move a measurement from one layer to another

Option 1:

Select the measurement you wish to move within the navigation pane
Drag and Drop it into the desired layer

or

Option 2:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to move to another layer
The measurement will turn red, indicating it's ready for deletion
The Edit window appears
Click on the dropdown menu of "Measurement Layer"
Choose one of the existing ones, or create a new layer
Click on "Finish" to save the changes

>>Back to Top<<

Axis Aligned Measurement

The Axis Aligned measurement shows the distance on all axes between two points. (XYZ axis)

Create an Axis Aligned measurement

Choose the "Axis Aligned" measurement tool
Left-click to designate a point at the top and another anywhere on the floor within the model
Choose the desired layer from the provided list to save the measurement
Proceed with additional measurements or save the current one

For further information on working with measurement layers, click here.

Save a measurement

Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.

Click on the measurement tape with the red number
Click on the red dialog box stating "Measurements and/or layers have not been saved yet"
A popup will appear; choose "Save changes" to save the measurements.

Change an Axis Aligned measurement

If the measurement has not been saved:

While the measurement remains unsaved, adjustments can be made at both points. Additionally, other measurements can be selected and edited during this stage.

To relocate a measurement point, simply hold down the Left-Mouse-Button and move it to the desired location
However, note that the middle point of a Vertical Measurement is not movable.

If the measurement has been saved:

Click on the measurement you wish to modify
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Make the necessary modifications
Save the changes

Delete a measurement

Click on the measurement you wish to delete

If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to remove
The measurement will turn red, indicating it's ready for deletion
Press the "Delete" key on your keyboard or click on the trash bin icon

or

Select the desired measurement in the navigation pane
Right-click to open the context menu
Click on the "Delete" button

Move a measurement from one layer to another

Option 1:

Select the measurement you wish to move within the navigation pane
Drag and Drop it into the desired layer

or

Option 2:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to move to another layer
The measurement will turn red, indicating it's ready for deletion
The Edit window appears
Click on the dropdown menu of "Measurement Layer"
Choose one of the existing ones, or create a new layer
Click on "Finish" to save the changes

>>Back to Top<<

Line Measurement

A Line measurement is a measurement on a user-defined plane that calculates the distance between points of interest.

Create a Line measurement

Select the "Line" measurement tool
Choose a start/end point in the model or plan data
Click on the red line between the start/end points to add additional measurement points
Select the desired layer from the list to store the measurement
Click on the "Finish" button
You can now proceed with another measurement or save the current one

For further information on working with measurement layers, click here.

Save a measurement

Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.

Click on the measurement tape with the red number
Click on the red dialog box stating "Measurements and/or layers have not been saved yet"
A popup will appear; choose "Save changes" to save the measurements.

Change a Line measurement

If the measurement has not been saved:

While the measurement remains unsaved, adjustments can be made at any points. You can also select and edit other measurements during this stage.

To manipulate a Polyline measurement:

To add a point, left-click on the red line
To remove a point, left-click on the blue point you wish to remove
To relocate a point, hold down the Left-Mouse-Button and move the point to the desired position

If the measurement has been saved:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"

To add a point, left-click on the red line
To remove a point, left-click on the blue point you wish to remove
To relocate a point, hold down the Left-Mouse-Button and move the point to the desired position

Add a point:

Remove a point:

Relocate a point:

Delete a measurement

Click on the measurement you wish to delete

If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to remove
The measurement will turn red, indicating it's ready for deletion
Press the "Delete" key on your keyboard or click on the trash bin icon

or

Select the desired measurement in the navigation pane
Right-click to open the context menu
Click on the "Delete" button

Move a measurement from one layer to another

Option 1:

Select the measurement you wish to move within the navigation pane
Drag and Drop it into the desired layer

or

Option 2:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to move to another layer
The measurement will turn red, indicating it's ready for deletion
The Edit window appears
Click on the dropdown menu of "Measurement Layer"
Choose one of the existing ones, or create a new layer
Click on "Finish" to save the changes

>>Back to Top<<

Area Measurement

The Area measurement is intended for area measurements on smooth planes. For example the floor or wall surfaces in buildings.

Create an Area measurement

NOTE: Please be aware that this tool is currently only functional in the Normal View. If you're currently in the Cutaway View, kindly switch to the Normal View to access its features.

Select the "Area" measurement tool
Draw a plane by marking at least 3 points in the model or plan data
Choose the desired layer from the list to save the measurement
Click on the "Finish" button
Proceed with another measurement or save the current one

For further information on working with measurement layers, click here.

Save a measurement

Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.

Click on the measurement tape with the red number
Click on the red dialog box stating "Measurements and/or layers have not been saved yet"
A popup will appear; choose "Save changes" to save the measurements.

Change a measurement

If the measurement has not been saved: While the measurement remains unsaved, adjustments can be made at any points. You can also select and edit other measurements during this stage.

To manipulate a Polyline measurement:

To add a point, left-click on the red line
To remove a point, left-click on the blue point you wish to remove
To relocate a point, hold down the Left-Mouse-Button and move the point to the desired position

If the measurement has been saved:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"

To add a point, left-click on the red line
To remove a point, left-click on the blue point you wish to remove
To relocate a point, hold down the Left-Mouse-Button and move the point to the desired position

Add a point:

Remove a point:

Relocate a point:

Delete an Area measurement

Click on the measurement you wish to delete

If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to remove
The measurement will turn red, indicating it's ready for deletion
Press the "Delete" key on your keyboard or click on the trash bin icon

or

Select the desired measurement in the navigation pane
Right-click to open the context menu
Click on the "Delete" button

Move a measurement from one layer to another

Option 1:

Select the measurement you wish to move within the navigation pane
Drag and Drop it into the desired layer

or

Option 2:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to move to another layer
The measurement will turn red, indicating it's ready for deletion
The Edit window appears
Click on the dropdown menu of "Measurement Layer"
Choose one of the existing ones, or create a new layer
Click on "Finish" to save the changes

>>Back to Top<<

Area Strip Measurement

An Area Strip measurement allows you to measure the area of a triangulated surface.

.

Create an Area Strip measurement

Select the Area Strip measurement tool
Draw a triangle by marking 3 points in the model
For additional triangles, select a 4th point. Each subsequent triangle shares a point with the previous one (e.g., point 2, 3, and 4 for the second triangle)
Select the desired layer from the list to store the measurement
Click on the "Finish" button
Proceed with another measurement or store the current one

For further information on working with measurement layers, click here.

Save a measurement

Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.

Click on the measurement tape with the red number
Click on the red dialog box stating "Measurements and/or layers have not been saved yet"
A popup will appear; choose "Save changes" to save the measurements.

Change an Area Strip measure point

If the measurement has not been saved:

While the measurement remains unsaved, adjustments can be made at all points. Additionally, other measurements can be selected and edited during this stage.

To manipulate the Area Strip measurement:

To add a point, left-click on the red line.
To remove a point, left-click on the blue point you wish to remove.
To relocate a point, hold down the Left-Mouse-Button and move it to the desired location on the red line.

Removing and adding another triangle/ point to an Area Strip Measurement is not possible at the moment!

If the measurement has been saved:

Access the "Edit" measurement tool
Click on the measurement you wish to modify
Make the necessary modifications
Save the changes
Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measure to open the drop-down menu
Click on "Edit"
To relocate a point, hold down the Left-Mouse-Button and move the point to the desired position

Delete a measurement

Click on the measurement you wish to delete

If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to remove
The measurement will turn red, indicating it's ready for deletion
Press the "Delete" key on your keyboard or click on the trash bin icon

or

Select the desired measurement in the navigation pane
Right-click to open the context menu
Click on the "Delete" button

Move a measurement from one layer to another

Option 1:

Select the measurement you wish to move within the navigation pane
Drag and Drop it into the desired layer

or

Option 2:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to move to another layer
The measurement will turn red, indicating it's ready for deletion
The Edit window appears
Click on the dropdown menu of "Measurement Layer"
Choose one of the existing ones, or create a new layer
Click on "Finish" to save the changes

>>Back to Top<<

Volume Measurement

A Volume measurement refers to the process of determining the amount of space occupied by a three-dimensional object.

What types of Volume calculation options are available?

Volume calculation based on:

Best Fit Surface (default calculation type): Creates an optimized triangulated surface from the drawn points.
Height: Calculates the volume above the defined height.
Point Clouds Difference: Calculates the volume between two point clouds.

Create a Volume measurement based on "Best Fit Surface"

Select the "Volume" measurement tool
Indicate the area to be measured by selecting at least 3 points on the point cloud
Choose the Calculation Type (example shows "Best Fit Surface" calculation type)
In Storage Location choose an existing measurement layer or create a new one
Calculate the volume by clicking the "Calculate Volume" button (wait for the message "Calculating Volume succeeded").
Press the "Finish" button
Proceed with another measurement or store the current one

For further information on working with measurement layers, click here.

Create a Volume measurement based on "Height"

Choose the "Volume" measurement tool
Select at least 3 points on the point cloud to indicate the area to be measured
Navigate to "Calculation Type" in the volume menu
Open the drop down menu and choose Based on "Height"
You can manually enter the height

or

Left-click on the desired point within the point cloud
The height of the selected point is automatically adopted
Calculate the volume by clicking the "Calculate Volume" button
The result is saved in the last layer used when saving the measurement

or

Navigate to the "Storage Location" option in the volume menu
Choose the desired layer from the list to store the measurement
Click on the "Finish" button
Proceed with another measurement or store the current one

For further information on working with measurement layers, click here.

Create a Volume measurement based on "Point Clouds Difference"

This tool is designed for comparing or calculating changes relative to a previous state. For example, in a construction site excavation, you can use either the topology point cloud provided by the state or a scan taken prior to the excavation. With the Point Clouds Difference Volume Measurement tool, you can calculate the amount of material excavated. Please note: This tool requires a minimum of 2 point clouds.

Activate at least 2 point clouds within the navigation pane
Choose the "Volume" measurement tool
Select at least 3 points on the point cloud to indicate the area to be measured
Navigate to "Calculation Type" in the volume menu
Open the drop down menu and choose "Point Clouds Difference"
In the list, which shows all active point clouds, assign point clouds to the two groups by clicking on the group number (group 1 is the Surface Point Cloud and group 2 the Base Point Cloud)
Click on the "Calculate Volume" button
Click on the "Finish" button
Proceed with another measurement or store the current one

For further information on working with measurement layers, click here.

Save a measurement

Once the measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol at the top left corner.

Click on the measurement tape with the red number
Click on the red dialog box stating "Measurements and/or layers have not been saved yet"
A popup will appear; choose "Save changes" to save the measurements.

Change a Volume measurement

If the measurement has not been saved:

While the measurement remains unsaved, adjustments can be made at all points. Additionally, other measurements can be selected and edited during this stage.

To manipulate the Volume measurement:

Check whether you are in the correct step of the volume calculation
- Calculation Area
- Calculation Type
- Storage Location

To add a point, left-click on the red line.
To remove a point, left-click on the blue point you wish to remove.
To relocate a point, hold down the Left-Mouse-Button and move it to the desired location on the red line.

If the measurement has been saved:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Check whether you are in the correct step of the volume calculation
- Calculation Area
- Calculation Type
- Storage Location
Make the necessary modifications
Save the changes

Add a point:

Remove a point:

Relocate a point:

Delete a Volume measurement

Click on the measurement you wish to delete

If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to remove
The measurement will turn red, indicating it's ready for deletion
Press the "Delete" key on your keyboard or click on the trash bin icon

or

Select the desired measurement in the navigation pane
Right-click to open the context menu
Click on the "Delete" button

Move a measurement from one layer to another

Option 1:

Select the measurement you wish to move within the navigation pane
Drag and Drop it into the desired layer

or

Option 2:

Click on the measurement you wish to move
If not yet activated, click on the eye icon to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
Click on the tape measurement to open the drop-down menu
Click on "Edit"
Within the point cloud, select the measurement you wish to move to another layer
The measurement will turn red, indicating it's ready for deletion
The Edit window appears
Click on the dropdown menu of "Measurement Layer"
Choose one of the existing ones, or create a new layer
Click on "Finish" to save the changes

>>Back to Top<<

@@ Line 38: / Line 38: @@
 A ''Distance Measurement'' is a measurement of the shortest '''path between a specified start- and endpoint.'''
-==== How to create a Distance Measurement? ====
+==== Create a Distance Measurement ====
 * Choose the ''"Distance"'' measurement tool
 * Left-click to designate a start/end point on the model or plan data
@@ Line 48: / Line 48: @@
 [[File:InUworld-Distance Measurement 2 highlighted.jpg|none|thumb|727x727px]]
-==== How to store/save a measurement? ====
+==== Save a measurement ====
 Once the measurement is completed, a number indicating the count of unsaved measurements appears next to the measurement symbol in the top-left corner
@@ Line 58: / Line 58: @@
-==== How to modify a Distance Measurement? ====
+==== Modify a Distance Measurement ====
 '''If a measurement hasn't been stored yet:'''
@@ Line 77: / Line 77: @@
-==== How to delete a measurement? ====
+==== Delete a measurement ====
 * Click on the measurement you wish to delete
 * If not yet activated, click on the ''eye icon'' to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
@@ Line 96: / Line 96: @@
-==== How to move a measurement from one layer to another? ====
+==== Move a measurement from one layer to another ====
 '''Option 1:'''
 * Select the measurement you wish to move within the navigation pane
@@ Line 134: / Line 134: @@
 [[File:Polyline1.png|600x600px]]
-==== How to create a Polyline measurement? ====
+==== Create a Polyline measurement ====
 * Choose the ''"Polyline"'' measurement tool
@@ Line 147: / Line 147: @@
-==== How to store/save a measurement? ====
+==== Save a measurement ====
 Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.
@@ Line 158: / Line 158: @@
-==== How to change a Polyline measurement? ====
+==== Change a Polyline measurement ====
 '''If the measurement has not been saved:'''
@@ Line 193: / Line 193: @@
-==== How to delete a measurement? ====
+==== Delete a measurement ====
 * Click on the measurement you wish to delete
@@ Line 214: / Line 214: @@
-==== How to move a measurement from one layer to another? ====
+==== Move a measurement from one layer to another ====
 '''Option 1:'''
 * Select the measurement you wish to move within the navigation pane
@@ Line 246: / Line 246: @@
 [[File:Vertical1.png|600x600px]]
-==== How to create a Vertical measurement? ====
+==== Create a Vertical measurement ====
 * Select the ''"Vertical"'' measurement tool
 * Left-click to choose a point at the top and another point on the floor within the model
@@ Line 257: / Line 257: @@
-==== How to store/save a measurement? ====
+==== Save a measurement ====
 Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.
@@ Line 266: / Line 266: @@
 [[File:InUworld-Save Measurements Pop Up highlighted.jpg|none|thumb|395x395px]]
-==== How to change a Vertical measurement? ====
+==== Change a Vertical measurement ====
 '''If the measurement has not been saved:'''
@@ Line 284: / Line 284: @@
 [[File:InUworld-Edit Measurement highlighted.jpg|none|thumb]]
-[[File:InUworld-Edit Measurement 2 highlighted.jpg|none|thumb]]
+[[File:InUworld-Edit Measurement Tool highlighted.jpg|none|thumb]]
-==== How to delete a measurement? ====
+==== Delete a measurement ====
 *Click on the measurement you wish to delete
@@ Line 308: / Line 308: @@
-==== How to move a measurement from one layer to another? ====
+==== Move a measurement from one layer to another ====
 '''Option 1:'''
 * Select the measurement you wish to move within the navigation pane
@@ Line 340: / Line 340: @@
 [[File:AxisAligned1.png|600x600px]]
-==== How to create an Axis Aligned measurement? ====
+==== Create an Axis Aligned measurement ====
 * Choose the ''"Axis Aligned"'' measurement tool
 * Left-click to designate a point at the top and another anywhere on the floor within the model
@@ Line 351: / Line 351: @@
-==== How to store/save a measurement? ====
+==== Save a measurement ====
 Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.
 * Click on the measurement tape with the red number
@@ Line 360: / Line 360: @@
-==== How to change an Axis Aligned measurement? ====
+==== Change an Axis Aligned measurement ====
 '''If the measurement has not been saved:'''
@@ Line 380: / Line 380: @@
-==== How to delete a measurement? ====
+==== Delete a measurement ====
 *Click on the measurement you wish to delete
@@ Line 400: / Line 400: @@
-==== How to move a measurement from one layer to another? ====
+==== Move a measurement from one layer to another ====
 '''Option 1:'''
 * Select the measurement you wish to move within the navigation pane
@@ Line 430: / Line 430: @@
-==== How to create a Line measurement? ====
+==== Create a Line measurement ====
 * Select the ''"Line"'' measurement tool
 * Choose a start/end point in the model or plan data
@@ Line 443: / Line 443: @@
-==== How to store/save a measurement? ====
+==== Save a measurement ====
 Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.
@@ Line 453: / Line 453: @@
-==== How to change a Line measurement? ====
+==== Change a Line measurement ====
 '''If the measurement has not been saved:'''
@@ Line 487: / Line 487: @@
 [[File:InUworld-Polyline Edit Relocate a point highlighted.jpg|none|thumb|430x430px]]
-==== How to delete a measurement? ====
+==== Delete a measurement ====
 *Click on the measurement you wish to delete
@@ Line 506: / Line 506: @@
 [[File:InUworld-Click on Measurement highlighted.jpg|none|thumb|536x536px]]
-==== How to move a measurement from one layer to another? ====
+==== Move a measurement from one layer to another ====
 '''Option 1:'''
 * Select the measurement you wish to move within the navigation pane
@@ Line 537: / Line 537: @@
 [[File:Area1.png|600x600px]]
-==== How to create an Area measurement? ====
+==== Create an Area measurement ====
 NOTE: Please be aware that this tool is currently only functional in the ''Normal View''. If you're currently in the ''Cutaway View'', kindly switch to the ''Normal View'' to access its features.
+[[File:InUworld-View Mode Normal View highlighted.jpg|none|thumb]]
 * Select the ''"Area"'' measurement tool
 * Draw a plane by marking at least 3 points in the model or plan data
@@ Line 550: / Line 551: @@
-==== How to store/save a measurement? ====
+==== Save a measurement ====
 Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.
 * Click on the measurement tape with the red number
@@ Line 559: / Line 560: @@
-==== How to change an measurement? ====
+==== Change a measurement ====
 '''If the measurement has not been saved:'''
 While the measurement remains unsaved, adjustments can be made at any points. You can also select and edit other measurements during this stage.
@@ Line 593: / Line 594: @@
-==== How to delete an Area measurement? ====
+==== Delete an Area measurement ====
 *Click on the measurement you wish to delete
@@ Line 613: / Line 614: @@
-==== How to move a measurement from one layer to another? ====
+==== Move a measurement from one layer to another ====
 '''Option 1:'''
 * Select the measurement you wish to move within the navigation pane
@@ Line 644: / Line 645: @@
 '''.'''[[File:AreaStrip1.png|600x600px]]
-==== How to create an Area Strip measurement? ====
+==== Create an Area Strip measurement ====
 * Select the ''Area Strip'' measurement tool
 * '''Draw a triangle''' by marking 3 points in the model
@@ Line 658: / Line 659: @@
-==== How to store/save a measurement? ====
+==== Save a measurement ====
 Once a measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol in the top left corner.
 * Click on the measurement tape with the red number
@@ Line 666: / Line 667: @@
 [[File:InUworld-Save Measurements Pop Up highlighted.jpg|none|thumb|395x395px]]
-==== How to change an Area Strip measure point? ====
+==== Change an Area Strip measure point ====
 '''If the measurement has not been saved:'''
@@ Line 695: / Line 696: @@
-==== How to delete a measurement? ====
+==== Delete a measurement ====
 *Click on the measurement you wish to delete
@@ Line 715: / Line 716: @@
-==== How to move a measurement from one layer to another? ====
+==== Move a measurement from one layer to another ====
 '''Option 1:'''
 * Select the measurement you wish to move within the navigation pane
@@ Line 751: / Line 752: @@
 * '''Best Fit Surface (default calculation type):'''  Creates an optimized triangulated surface from the drawn points.
 * '''Height:''' Calculates the volume above the defined height.
-* '''Point Clouds Difference:'''  Calculates the volume between two sets of point clouds.
+* '''Point Clouds Difference:'''  Calculates the volume between two point clouds.
-==== How to create a Volume measurement based on "Best Fit Surface"? ====
+==== Create a Volume measurement based on "Best Fit Surface" ====
 * Select the ''"Volume"'' measurement tool
 * Indicate the area to be measured by selecting at least 3 points on the point cloud
@@ Line 771: / Line 772: @@
 [[File:InUworld-Volume Measurement Calculating Succeeded Notification.png|none|thumb]]
 [[File:InUworld-Volume Measurement Finished.jpg|none|thumb|401x401px]]
-==== How to create a Volume measurement based on "Height"? ====
+==== Create a Volume measurement based on "Height" ====
 * Choose the ''"Volume"'' measurement tool
 * Select at least 3 points on the point cloud to indicate the area to be measured
@@ Line 797: / Line 798: @@
 [[File:InUworld-Volume Measurement Storage Location highlighted.jpg|none|thumb]][[File:InUworld-Volume Measurement Calculating Notification.png|none|thumb]]
 [[File:InUworld-Volume Measurement Calculating Succeeded Notification.png|none|thumb]]
-[[File:InUworld-Volume Measurement Finished.jpg|none|thumb|401x401px]]
+[[File:InUworld-Volume Measurement by Height 3 smaller cut.jpg|none|thumb]]
-==== How to create a Volume measurement based on "Point Clouds Difference"? ====
+==== Create a Volume measurement based on "Point Clouds Difference" ====
+This tool is designed for comparing or calculating changes relative to a previous state. For example, in a construction site excavation, you can use either the topology point cloud provided by the state or a scan taken prior to the excavation. With the ''Point Clouds Difference Volume Measurement'' tool, you can calculate the amount of material excavated. '''Please note:''' This tool requires a minimum of 2 point clouds.
 * Activate at least 2 point clouds within the navigation pane
 * Choose the ''"Volume"'' measurement tool
@@ Line 813: / Line 815: @@
 For further information on working with measurement layers, click [[Layer#Measurement Layer|here]].
-==== How to store/save a measurement? ====
+[[File:InUworld-Volume Measurement Activate Point Clouds highlighted.png|none|thumb|404x404px]]
+[[File:InUworld-Volume Measurement highlighted.jpg|none|thumb]]
+[[File:InUworld-Volume Measurement Select 3 Points highlighted.png|none|thumb|346x346px]]
+[[File:InUworld-Volume Measurement Calculation Type Point Clouds Difference highlighted.png|none|thumb]]
+[[File:InUworld-Volume Measurement Calculation Type Point Clouds Difference 3 highlighted.jpg|none|thumb|511x511px]]
+[[File:InUworld-Volume Measurement Storage Location highlighted.jpg|none|thumb]][[File:InUworld-Volume Measurement Calculating Notification.png|none|thumb]]
+[[File:InUworld-Volume Measurement Calculating Succeeded Notification.png|none|thumb]]
+[[File:InUworld-Volume Measurement Calculation Point Clouds Difference 4 highlighted.jpg|none|thumb|524x524px]]
+==== Save a measurement ====
 Once the measurement is completed, a numerical indicator (representing the number of unsaved measurements) appears next to the measurement symbol at the top left corner.
-* Open the measurement
+* Click on the measurement tape with the red number
-* Click on the red dialog box
+* Click on the red dialog box stating ''"Measurements and/or layers have not been saved yet"''
-* A popup will appear; choose ''"Save changes"'' to save the measurements
+* A popup will appear; choose ''"Save changes"'' to save the measurements.
+[[File:InUworld-Save Measurements highlighted.jpg|none|thumb]]
+[[File:InUworld-Save Measurements Pop Up highlighted.jpg|none|thumb|395x395px]]
-==== How to change a Volume measurement? ====
+==== Change a Volume measurement ====
 '''If the measurement has not been saved:'''
 While the measurement remains unsaved, adjustments can be made at all points. Additionally, other measurements can be selected and edited during this stage.
-To manipulate the ''Area Strip'' measurement:
+To manipulate the ''Volume'' measurement:
 * Check whether you are in the correct step of the volume calculation
@@ Line 835: / Line 853: @@
 '''If the measurement has been saved:'''
-* Access the ''"Edit"'' measurement tool
+* Click on the measurement you wish to move
-* Click on the measurement you wish to modify
+* If not yet activated, click on the ''eye icon'' to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
+* Click on the ''tape measurement'' to open the drop-down menu
+* Click on ''"Edit"''
 * Check whether you are in the correct step of the volume calculation
 ** Calculation Area
@@ Line 844: / Line 864: @@
 * Save the changes
-==== How to delete a Volume measurement? ====
-* Access the ''"Edit"'' measurement tool
+[[File:InUworld-Polyline Edit highlighted.jpg|none|thumb]]
-* Select the measurement you wish to delete
+'''Add a point:'''
-* The measurement turns red, indicating it's ready for deletion
+[[File:InUworld-Polyline Edit Add a point highlighted.jpg|none|thumb|391x391px]]
+'''Remove a point:'''
+[[File:InUworld-Polyline Edit Remove a point highlighted.jpg|none|thumb|394x394px]]
+'''Relocate a point:'''
+[[File:InUworld-Polyline Edit Relocate a point highlighted.jpg|none|thumb|430x430px]]
+==== Delete a Volume measurement ====
+* Click on the measurement you wish to delete
+* If not yet activated, click on the ''eye icon'' to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
+* Click on the ''tape measurement'' to open the drop-down menu
+* Click on ''"Edit"''
+* Within the point cloud, select the measurement you wish to remove
+* The measurement will turn red, indicating it's ready for deletion
 * Press the ''"Delete"'' key on your keyboard or click on the ''trash bin'' icon
@@ Line 853: / Line 894: @@
 * Select the desired measurement in the navigation pane
-* ''Right-click'' to access the context menu
+* ''Right-click'' to open the context menu
-* Click the ''"Delete"'' button
+* Click on the ''"Delete"'' button
+[[File:InUworld-Measurement visibility highlighted.jpg|none|thumb]]
+[[File:InUworld-Edit Measurements highlighted.jpg|none|thumb]]
+[[File:InUworld-Click on Measurement highlighted.jpg|none|thumb|536x536px]]
-==== How to move a measurement from one layer to another? ====
+==== Move a measurement from one layer to another ====
 '''Option 1:'''
 * Select the measurement you wish to move within the navigation pane
-* ''Drag and Drop'' it into the desired layer
+* ''Drag and Drop'' it into the desired layer[[File:InUworld-Drag and Drop Measurements highlighted.jpg|none|thumb|427x427px]]
 or
-'''Option 2:'''
+'''Option 2''':
-* Enter ''Edit'' mode
-* Select the measurement you wish to move to another layer
-* Select the desired layer
-* ''"Finish"'' and ''"Save"'' the measurement
+* Click on the measurement you wish to move
+* If not yet activated, click on the ''eye icon'' to make the measurement visible (To activate all measurements, click on the eye of the folder, if you only want to activate a specific measurement, click on its corresponding eye icon)
+* Click on the ''tape measurement'' to open the drop-down menu
+* Click on ''"Edit"''
+* Within the point cloud, select the measurement you wish to move to another layer
+* The measurement will turn red, indicating it's ready for deletion
+* The ''Edit window'' appears
+* Click on the dropdown menu of ''"Measurement Layer"''
+* Choose one of the existing ones, or create a new layer
+* Click on ''"Finish"'' to save the changes
+[[File:InUworld-Measurement visibility highlighted.jpg|none|thumb]]
+[[File:InUworld-Edit_Measurements_highlighted.jpg|none|thumb]]
+[[File:InUworld-Move Measurement to different layer 2 highlighted.jpg|none|thumb|539x539px]]
+[[File:InUworld-Move Measurement to different layer 3 highlighted.jpg|none|thumb|511x511px]]
 [[Measurement#What is measurable?|>>Back to Top<<]]<div class="noprint" style="background-color:#FAFAFA; position:fixed; bottom:2%; left:0.25%; padding:0; margin:0;">
 </div>

Measurement: Difference between revisions

Latest revision as of 09:07, 10 June 2024

What is measurable?

What measurement tools are available?

Distance Measurement

Create a Distance Measurement

Save a measurement

Modify a Distance Measurement

Delete a measurement

Move a measurement from one layer to another

Polyline Measurement

Create a Polyline measurement

Save a measurement

Change a Polyline measurement

Delete a measurement

Move a measurement from one layer to another

Vertical Measurement

Create a Vertical measurement

Save a measurement

Change a Vertical measurement

Delete a measurement

Move a measurement from one layer to another

Axis Aligned Measurement

Create an Axis Aligned measurement

Save a measurement

Change an Axis Aligned measurement

Delete a measurement

Move a measurement from one layer to another

Line Measurement

Create a Line measurement

Save a measurement

Change a Line measurement

Delete a measurement

Move a measurement from one layer to another

Area Measurement

Create an Area measurement

Save a measurement

Change a measurement

Delete an Area measurement

Move a measurement from one layer to another

Area Strip Measurement

Create an Area Strip measurement

Save a measurement

Change an Area Strip measure point

Delete a measurement

Move a measurement from one layer to another

Volume Measurement

What types of Volume calculation options are available?

Create a Volume measurement based on "Best Fit Surface"

Create a Volume measurement based on "Height"

Create a Volume measurement based on "Point Clouds Difference"

Save a measurement

Change a Volume measurement

Delete a Volume measurement

Move a measurement from one layer to another

Navigation menu